page 1 of 5 www.aecsensors.com sales department tel: (888) 847-6552 30C20 defnite purpose contactor ? 30c 20fla defnite purpose contactor ? robust 1 - 4 pole contactor ? arc covers as standard ? industry standard mounting ? rohs compliant ? ul file no: e61703 ref: 30C20 101711jhm contact data table 1 arrangements: 1 form x (spst-no-dm) with or without shunt 2 form x (dpst-no-dm) 3 form x (3pst-no-dm) 4 form x (4pst-no-dm) material: agcdo, agsnoino model no full load amps (fla) poles line voltage (vac) locked rotor amps (lra) resistive amps max. hp voltage 1 phase 3 phase 30C20-1021 20 1 120 120 30 120 1 240/277 120 240 2 480 100 600 80 30C20-1022 20 2 120 120 30 120 1.5 240/277 120 240 3 480 100 480 7.5 600 80 600 7.5 30C20-1023 20 3 120 120 30 110/120 1.5 240/277 120 200/240 3 7.5 480 100 480 7.5 600 80 600 7.5 30C20-1024 20 4 120 120 30 120 1.5 240/277 120 240 3 7.5 480 100 480 7.5 600 80 600 7.5 fla rating tested for 30,000 cycles of endurance at 240/480/600vac per ul508. resistive heat rating tested for 250,000 cycles at 277vac. lra rating tested for 6000 cycles of locked rotor endurance per ul508.
30C20 defnite purpose contactor page 2 of 5 www.aecsensors.com sales department tel: (888) 847-6552 general specifcations table 2 initial operate time ms 20 terminations release time ms 10 (typical) coil terminals 1 pole 2 pole 3 pole 4 pole 0.250 qc + #6-32 screw (dual 0.250 qc optional) - per terminal bounce time ms 10 arc cover standard insulation system ul class b 130c initial dielectric strength power terminals 1 pole 2 pole #10-32 screw or #14-4 box lug + dual 0.250 qc between contacts and coil vac 2200 between poles vac 2200 (includes shunt) 3 pole 4 pole #10-32 screw or #14-4 box lug + quad 0.250 qc between open contacts vac 2200 temperature range c -40 ... +65 recommended tightening torque #10-32 22 in.lbf (2.49 nm) unit weight (approx.) 1 pole 0.5 lb box lug 40 in.lbs (4.52 nm) 2 pole 0.6 lb wire size #10-32 16-8awg* 3 pole 1.0 lb box lug 14-4awg 4 pole 1.24 lb * must use ring terminals ordering codes type contact material contact arrangement cover protection and terminations coil code special options 3 0 c 2 0 - 1 0 2 - 1 - - contact ratings 20 - 20 fla see tables 3 to 6 contact material 10 - agcdo (standard) 70 - agsnoino contact number & arrangement 21 - spst-no 22 - dpst-no 23 - 3pst-no 24 - 4pst-no cover protection category 1 - ip00, no overall cover termination codes (see drawings for full specifcations) 1 - #10-32 combination philips screw with quad qc blades 2 - same as 1 with sems screw and pressure plate 3 - #14-4awg box lug with quad qc blades (box lug with quick connect) 4 - #14-4awg box lug with dual qc blades (box lug with quick connect) (standard for 40fla) 5 - #10-32 combination phillips screw with dual qc blades (standard for 20-30fla) 6 - #14-2awg box lug with qc blades (standard for 50-60fla) 7 - #14-1awg box lug with qc blades (standard for 75-150fla) reserved for customer specifc requirements 001 - dual 0.25 qc blades for coil terminations 002 - 999 - optional customer specifc number t terminals l terminals ref: 30C20 101711jhm
30C20 defnite purpose contactor american electronic components inc., 1101 lafayette st. elkhart, in46516 page 3 of 5 www.aecsensors.com sales department tel: (888) 847-6552 ref: 30C20 10171110jhm coil data (30C20-1022 ) table 4 voltage: 24-277vac 50/60hz. see coil data below. (480vac available but not ul approved) insulation class: ul class b (130c) coil voltage code rated voltage 50/60hz coil resistance (ohms) coil operating voltage (vac) minimum inrush nominal coil power must release must operate max voltage va @ 50hz va @ 60hz va @ 50hz va @ 60hz 5024 24 11 6 18 30 33 30 8 6.5 5120 120 237 20 88 132 33 30 8 6.5 5230 208/240 1000 40 177 264 33 30 8 6.5 5277 277 1600 50 221 300 33 30 8 6.5 5480 480 4200 100 380 528 33 30 8 6.5 coil data (30C20-1021 ) table 3 voltage: 24-277vac 50/60hz. see coil data below. (480vac available but not ul approved) insulation class: ul class b (130c) coil voltage code rated voltage 50/60hz coil resistance (ohms) coil operating voltage (vac) minimum inrush nominal coil power must release must operate max voltage va @ 50hz va @ 60hz va @ 50hz va @ 60hz 5024 24 18 6 18 30 31 28 6 5 5120 120 420 20 88 132 31 28 6 5 5230 208/240 1800 40 177 264 31 28 6 5 5277 277 2500 50 221 300 31 28 6 5 5480 480 8000 100 380 528 31 28 6 5 coil data (30C20-1023 ) table 5 voltage: 24-277vac 50/60hz. see coil data below. (480vac available but not ul approved) insulation class: ul class b (130c) coil voltage code rated voltage 50/60hz coil resistance (ohms) coil operating voltage (vac) minimum inrush nominal coil power must release must operate max voltage va @ 50hz va @ 60hz va @ 50hz va @ 60hz 5024 24 7 6 18 30 65 60 7.5 6 5120 120 180 20 88 132 65 60 7.5 6 5230 208/240 719 40 177 264 65 60 7.5 6 5277 277 900 65 220 300 65 60 7.5 6 5480 480 3100 150 384 520 65 60 7.5 6 coil data (30C20-1024 ) table 6 voltage: 24-277vac 50/60hz. see coil data below. (480vac available but not ul approved) insulation class: ul class b (130c) coil voltage code rated voltage 50/60hz coil resistance (ohms) coil operating voltage (vac) minimum inrush nominal coil power must release must operate max voltage va @ 50hz va @ 60hz va @ 50hz va @ 60hz 5024 24 6 6 18 30 62 59 9 7 5120 120 150 20 88 132 62 59 9 7 5230 208/240 600 40 177 264 62 59 9 6 5277 277 750 65 220 300 62 59 9 7 5480 480 4200 150 384 520 62 59 9 7
30C20 defnite purpose contactor ref: 30C20 101711jhm page 4 of 5 www.aecsensors.com sales department tel: (888) 847-6552 overall dimensions fig. 1 dimensions in inches (millimetres) 3 pole 4 pole 2 pole 1 pole
30C20 defnite purpose contactor ref: 30C20 101711jhm page 5 of 5 www.aecsensors.com sales department tel: (888) 847-6552 1 no/nc quick connects 1 no/nc screw terminals one spdt switch per side two spdt switches per side american electronic components inc,. 1100 lafayette st., elkhart, in 46516 toll free: (888) 847-6552, tel: (574) - 295-6330 www.aecsensors.com specifcations and availability are liable to change without notice. power terminations termination codes: 1 & 5 standard on 20-30fla #10-32 combination phillips/slotted and 5/16 hex head screw with #12 washer termination code: 2 optional on 20-40fla #10-32 sems screw with pressure plate termination codes: 3 & 4 box lug 14-4 awg (cu/al) 0.25 6 dimension in inches auxillary switches for 3 & 4 pole contactors description contact arrangement termination part number single unit interlock confguration. one on each side - max set up to two switches spst-no + spst-nc break before make 0.250 qc 30ca1q single unit interlock confguration. one on each side - max set up to two switches spst-no + spst-nc break before make #6-32 screw terminals 30ca1s spdt circuit one switch per side spdt 0.250 qc 30cb1q spdt circuit two switches per side 2 x spdt 0.250 qc 30cb2s auxillary switch contact rating spst-no+spst-nc spdt voltage rating 120vac 240vac 480vac 600vac 120vac 250vac amps - break 3.00 1.50 0.75 0.60 0.5 0.25 amps - make 30 15 7.5 6 15 15 amps - continuous 10 10 10 10 10 10
|
